The installation of Samsung Galaxy S6 stock rom is strictly advisable for a bricked Samsung Galaxy S6 android device, but just in case you still wish to flash your Samsung Galaxy S6 to default, then I recommend you follow this tutorial.
Today’s stroll, I would brief you guys on how to unbrick your bricked Samsung Galaxy S6 via an installation guide of Samsung Galaxy S6 stuck rom.
Step 3: After that, download Samsung Galaxy S6 stuck rom from here or here, and move the downloaded files to the internal storage of Samsung Galaxy S6 device.
Step 4: After that, Boot your Galaxy S6 into Download Mode. To perform the operation, you have to power off your device and then press, Volume Down + Power + Home. Press Volume Up now to continue to Download Mode.
Step 6: After that, choose AP in Odin and select the firmware file with .tar extension in which you have downloaded. Also endeavor that the re-partition is not ticked in the odin.
Step 7: Finally, click on the start button, and the process would begin immediately. Once the process is completed, you would notice the RESET or PASS message on the ODIN screen. Then your device would boot into recovery mode, and the device would be restarted automatically.
Once the process is completed, your bricked Samsung Galaxy S6 would be recovered to its default mode. If you have any other problem regarding to this guide, feel free to let us know via the comment section, and we won’t hesitate to resolve it.
Today’s stroll, I would brief you guys on how to unbrick your bricked Samsung Galaxy S6 via an installation guide of Samsung Galaxy S6 stuck rom.
Download and Install Samsung Galaxy S6 Stock ROM- Unbrick Your Device
Step 1: Download and install Samsung Galaxy s6 drivers from Here to your PC
Step 2: Enable USB debugging on Samsung Galaxy S6.
Step 2: Enable USB debugging on Samsung Galaxy S6.
Step 3: After that, download Samsung Galaxy S6 stuck rom from here or here, and move the downloaded files to the internal storage of Samsung Galaxy S6 device.
Step 4: After that, Boot your Galaxy S6 into Download Mode. To perform the operation, you have to power off your device and then press, Volume Down + Power + Home. Press Volume Up now to continue to Download Mode.
Step 5: Once
your device is in download mode, simply connect the phone to your PC
via the use of usb cable and the ODIN application would notify an added
message.
Step 6: After that, choose AP in Odin and select the firmware file with .tar extension in which you have downloaded. Also endeavor that the re-partition is not ticked in the odin.
Step 7: Finally, click on the start button, and the process would begin immediately. Once the process is completed, you would notice the RESET or PASS message on the ODIN screen. Then your device would boot into recovery mode, and the device would be restarted automatically.
Once the process is completed, your bricked Samsung Galaxy S6 would be recovered to its default mode. If you have any other problem regarding to this guide, feel free to let us know via the comment section, and we won’t hesitate to resolve it.
1 blogger:
nice one
Reply